If you have a website or perhaps an app, speed is important. The faster your web site works and then the faster your apps function, the better for you. Because a website is only a variety of data files that interact with each other, the systems that store and access these files play a huge role in site performance.

Hard disks, or HDDs, have been, right until the past few years, the most efficient devices for storing information. Then again, in recent years solid–state drives, or SSDs, have already been becoming popular. Take a look at our evaluation chart to determine if HDDs or SSDs are more appropriate for you.

1. Access Time

Resulting from a revolutionary new solution to disk drive performance, SSD drives enable for considerably faster file access speeds. Having an SSD, data accessibility instances are much lower (just 0.1 millisecond).

HDD drives still take advantage of the same general data file access technique that was actually created in the 1950s. Even though it has been significantly improved consequently, it’s sluggish when compared with what SSDs will provide. HDD drives’ data access rate varies somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Because of the brand new radical data storage technique shared by SSDs, they give you speedier data access speeds and speedier random I/O performance.

In the course of SupremeServer’s tests, all SSDs revealed their ability to work with at least 6000 IO’s per second.

With a HDD drive, the I/O performance gradually increases the more you use the hard drive. Nonetheless, as soon as it reaches a specific restriction, it can’t get faster. And because of the now–old concept, that I/O limit is much less than what you might find having an SSD.

HDD can only go so far as 400 IO’s per second.

3. Reliability

SSD drives lack just about any moving parts, which means there is significantly less machinery in them. And the fewer actually moving elements you’ll find, the fewer the chances of failing are going to be.

The common rate of failure of an SSD drive is 0.5%.

Since we have previously observed, HDD drives make use of spinning hard disks. And something that makes use of plenty of moving elements for continuous intervals is at risk of failure.

HDD drives’ typical rate of failure can vary between 2% and 5%.

4. Energy Conservation

SSD drives are usually smaller compared to HDD drives and also they do not have any moving components at all. Because of this they don’t generate so much heat and need much less energy to function and fewer power for chilling purposes.

SSDs consume amongst 2 and 5 watts.

HDD drives are well known for becoming loud; they’re at risk of getting too hot and whenever there are several hard drives within a hosting server, you need a further a / c unit used only for them.

As a whole, HDDs consume in between 6 and 15 watts.

5. CPU Power

The faster the file accessibility speed is, the sooner the file requests will be handled. Therefore the CPU won’t have to save assets expecting the SSD to respond back.

The normal I/O delay for SSD drives is 1%.

HDD drives allow for sluggish access speeds when compared with SSDs do, resulting in the CPU being forced to hang around, whilst saving allocations for your HDD to find and return the inquired data.

The normal I/O delay for HDD drives is just about 7%.

6.Input/Output Request Times

In real life, SSDs carry out as perfectly as they have in the course of SupremeServer’s tests. We produced a complete platform back up using one of our production machines. All through the backup process, the average service time for any I/O queries was basically under 20 ms.

Throughout the very same trials with the exact same web server, this time installed out using HDDs, performance was significantly slower. During the web server data backup process, the regular service time for any I/O calls fluctuated somewhere between 400 and 500 ms.

7. Backup Rates

You can actually experience the real–world added benefits of having SSD drives every day. For instance, on a web server designed with SSD drives, a full back up is going to take only 6 hours.

We made use of HDDs exclusively for several years and we’ve great understanding of just how an HDD functions. Creating a backup for a web server equipped with HDD drives can take around 20 to 24 hours.

Our Linux VPS web hosting and additionally our typical Linux cloud website hosting accounts have SSD drives automatically. Join our SupremeServer family, and find out the way we can assist you enhance your site.

  • Service guarantees

  • All of our Virtual Private Servers provide no installation service fees and operate in a dependable network offering 99.9% of uptime. Full root server access guaranteed.
  • Compare our prices

  • Review the allocations and capabilities offered by SupremeServer’s Virtual Private Servers. You could start with a cheaper VPS Web Hosting package and move up with a click as your demands increase.
  • Compare our hosting plans
  • Contact Us

  • Get in touch with us 24 hours by email or by using our really–fast ticketing system. Our techs are prepared to reply to your inquiries in up to 60 mins.